HP MSR Router Series

54
After you reset a PPPoE session in on-demand mode, the device establishes a new PPPoE session when
there is a demand for data transmission.
To reset a PPPoE session:
Ste
p
Command Remarks
1. Reset a PPPoE session.
reset pppoe-client { all |
dial-bundle-number number }
Available in user view.
Displaying and maintaining PPPoE
Displaying and maintaining PPPoE server
Execute display commands in any view.
Task Command
Display summary information for PPPoE sessions
(centralized devices in standalone mode).
display pppoe-server session summary [ interface
interface-type interface-number ]
Display summary information for PPPoE sessions
(distributed devices in standalone
mode/centralized devices in IRF mode).
display pppoe-server session summary { slot slot-number |
interface interface-type interface-number }
Display summary information for PPPoE sessions
(distributed devices in IRF mode).
display pppoe-server session summary { chassis
chassis-number slot slot-number | interface interface-type
interface-number }
Display packet statistics for PPPoE sessions
(centralized devices in standalone mode).
display pppoe-server session packet [ interface
interface-type interface-number ]
Display packet statistics for PPPoE sessions
(distributed devices in standalone
mode/centralized devices in IRF mode.
display pppoe-server session packet { slot slot-number |
interface interface-type interface-number }
Display packet statistics for PPPoE sessions
(distributed devices in IRF mode).
display pppoe-server session packet { chassis
chassis-number slot slot-number | interface interface-type
interface-number }
Display information about blocked users
(centralized devices in standalone mode).
display pppoe-server throttled-mac [ interface interface-type
interface-number ]
Display information about blocked users
(distributed devices in standalone
mode/centralized devices in IRF mode).
display pppoe-server throttled-mac { slot slot-number |
interface interface-type interface-number }
Display information about blocked users
(distributed devices in IRF mode).
display pppoe-server throttled-mac { chassis chassis-number
slot slot-number | interface interface-type interface-number }
Display VA pool information. display pppoe-server va-pool
Displaying and maintaining PPPoE client
Execute display commands in any view and reset commands in user view.