HP MSR Router Series User Manual

136
Ste
p
Command Remarks
4. Configure the service type and
related parameters for the PVC.
• Set the service type to CBR and
configure related parameters:
service cbr output-pcr [ cdvt
cdvt-value ]
• Set the service type to UBR and
configure related parameters:
service ubr output-pcr
• Set the service type to VBR-NRT
and configure related
parameters:
service vbr-nrt output-pcr
output-scr output-mbs
• Set the service type to VBR-RT
and configure related
parameters:
service vbr-rt output-pcr
output-scr output-mbs
The default service type is UBR.
The newly configured service
type overwrites the existing
ones. Different PVCs in a
PVC-group or interface can be
configured with different
service types.
5. Configure the transmission
priority for the PVC.
transmit-priority value
By default, the transmission
priority is:
• 0 for UBR services.
• 5 for VBR-NRT services.
• 8 for VBR-RT services.
When you change the service
type for the PVC, the
transmission priority of the PVC
is restored to the default.
Configuring applications carried by ATM
As shown in Table 6, although ATM can carry multiple protocols, a specific encapsulation type might not
support ATM applications (such as IPoA, IPoEoA, PPPoA, and PPPoEoA).
Table 6 Encapsulation type support for ATM applications
ATM application aal5snap aal5mux aal5nlpid
IPoA Supported
Supported (InARPoA not
supported)
Supported (InARPoA not
supported)
IPoEoA Supported Supported Not supported
PPPoA Supported Supported Not supported
PPPoEoA Supported Supported Not supported
NOTE:
W
hen aal5snap is used, a PVC or PVC-group can carry two or more protocols at the same time. When
aal5mux is used, a PVC or PVC-group supports only one protocol at a time.

HP MSR Router Series Specifications

General

Brand	HP
Model	MSR Router Series
Category	Network Router
Language	English