297
Redirecting authenticated users to a specific webpage
To make the device automatically redirect authenticated users to a specific webpage, do the
following in logon.htm and logonSuccess.htm:
1. In logon.htm, set the target attribute of Form to blank.
See the contents in gray:
<form method=post action=logon.cgi target="blank">
2. Add the function for page loading pt_init() to logonSucceess.htm.
See the contents in gray:
<html>
<head>
<title>LogonSuccessed</title>
<script type="text/javascript" language="javascript"
src="pt_private.js"></script>
</head>
<body onload="pt_init();" onbeforeunload="return pt_unload();">
... ...
</body>
</html>
NOTE:
Hewlett Packard Enterprise recommends using browser IE 6.0 or above on the authentication
clients.
Configuring the local portal server
To make the local portal server take effect, specify the protocol to be used for communication
between the portal client and local portal server.
Configuration prerequisites
When you specify the protocol for the local portal server to support, the local portal server will load
the default authentication page file, which is supposed to be saved in the root directory of the device.
Therefore, to make sure the local portal server uses the user-defined default authentication pages,
you must edit and save them correctly or else the system default authentication pages are used.
Configuration procedure
To configure the local portal server:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Configure the protocol type for
the local portal server to support
and load the default
authentication page file.
portal local-server http
By default, the local portal server
does not support any protocol.
To Next Page
Loading...
Need help?
General
