HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

398
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Create a user profile,
and enter its view.
user-profile
profile-name
You can use the command to enter the view
of an existing user profile.
Performing configurations in user profile view
After a user profile is created, perform configurations in user profile view. The configuration made in
user profile view takes effect when the user profile is enabled and a user using the user profile goes
online.
Supported configurations include QoS policies and WLAN configurations.
For more information about QoS policies, see HPE FlexNetwork MSR Router Series Comware 5
ACL and QoS Configuration Guide.
For more information about WLAN configuration, see HPE FlexNetwork MSR Router Series
Comware 5 WLAN Configuration Guide.
Enabling a user profile
Enable a user profile so that configurations in the profile can be applied by the device to restrict user
behaviors. If the device detects that the user profile is disabled, the device denies the associated
user even the user has been verified by the authentication server.
You can only edit or remove the configurations in a disabled user profile.
Disabling a user profile logs out the users that are using the user profile.
To enable a user profile:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enable a user profile.
user-profile
profile-name
enable
A user profile is disabled by
default.
Displaying and maintaining user profile
Task Command Remarks
Display information about all the
created user profiles.
display user-profile
[
|
{
begin
|
exclude
|
include
} regular-expression ]
Available in any view.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English