HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

50
Step Command Remarks
8. Specify the authorization
method for portal users.
• In non-FIPS mode:
authorization portal { local | none |
radius-scheme
radius-scheme-name [ local ] }
• In FIPS mode:
authorization portal { local |
radius-scheme
radius-scheme-name [ local ] }
Optional.
The default authorization
method is used by default.
9. Specify the authorization
method for PPP users.
• In non-FIPS mode:
authorization ppp
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme
radius-scheme-name [ local ] }
• In FIPS mode:
authorization ppp
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default authorization
method is used by default.
10. Specify the authorization
method for SSL VPN
users.
authorization ssl-vpn radius-scheme
radius-scheme-name
Optional.
The default authorization
method is used by default.
11. Specify the authorization
method for VoIP users.
authorization voip radius-scheme
radius-scheme-name
Optional.
The default authorization
method is used by default.
Configuring accounting methods for an ISP domain
In AAA, accounting is a separate process at the same level as authentication and authorization. This
process sends accounting start/update/end requests to the specified accounting server. Accounting
is optional.
AAA supports the following accounting methods:
• No accounting (none)—The NAS does not perform accounting for the users.
• Local accounting (local)—Local accounting is implemented on the NAS. It counts and
controls the number of concurrent users who use the same local user account. It does not
provide statistics for charging. The maximum number of concurrent users using the same local
user account is set by the access-limit command in local user view.
• Remote accounting (scheme)—The NAS works with a RADIUS server or HWTACACS server
for accounting. You can configure local or no accounting as the backup method, which will be
used when the remote server is not available.
By default, an ISP domain uses the local accounting method.
Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. For RADIUS or HWTACACS accounting, configure the RADIUS or HWTACACS scheme to be
referenced first. The local and none accounting methods do not require a scheme.
2. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type to limit the accounting protocols that
can be used for access.
3. Determine whether to configure an accounting method for all access types or service types.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English