439
Step Command Remarks
3. Configure the password
aging time for the local user.
password-control aging
aging-time
Optional.
By default, the setting equals that
for the user group to which the
local user belongs. If no aging
time is configured for the user
group, the global setting applies
to the local user.
4. Configure the minimum
password length for the local
user.
password-control length
length
Optional.
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.
5. Configure the password
composition policy for the
local user.
password-control composition
type-number
type-number
[
type-length
type-length ]
Optional.
By default, the settings equal
those for the user group to which
the local user belongs. If no
password composition policy is
configured for the user group, the
global settings apply to the local
user.
Setting super password control parameters
CLI commands are divided into four levels: visit, monitor, system, and manage, in ascending order.
Login users are divided into four levels accordingly, each corresponding to a command level. A user
of a certain level can only use the commands at that level or lower levels.
To switch from a lower user level to a higher one, a user needs to enter a password for authentication.
This password is called a super password. For more information on super passwords, see HPE
FlexNetwork MSR Router Series Comware 5 Fundamentals Configuration Guide.
To set super password control parameters:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Set the password aging time
for super passwords.
password-control super aging
aging-time
Optional.
By default, the super password
aging time is the same as the
global password aging time.
3. Configure the minimum
length for super passwords.
password-control super length
length
Optional.
By default, the minimum super
password length is the same as
the global minimum password
length.
4. Configure the password
composition policy for super
passwords.
password-control super
composition type-number
type-number
[
type-length
type-length ]
Optional.
By default, the super password
composition policy is the same as
the global password composition
policy.