HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

298
Step Command Remarks
3. Configure a binding between
SSIDs and an authentication
page file.
portal local-server bind ssid
ssidname&<1-10>
file
filename
Optional.
By default, no binding is
configured.
The specified authentication page
file must exist.
Support for this command
depends on the device model. For
more information about this
command, see HPE FlexNetwork
MSR Router Series Comware 5
Security Command Reference.
4. Configure the welcome banner
of the default authentication
pages of the local portal server.
portal server banner
banner-string
Optional.
No welcome banner by default.
An AC in a different subnet from an AP cannot obtain the SSID of a client associated with that AP and
thus does not support binding SSIDs to an authentication page file. For more information about AC
and SSID, see HPE FlexNetwork MSR Router Series Comware 5 WLAN Configuration Guide.
Enabling portal authentication
You must first enable portal authentication on an access interface before it can perform portal
authentication for connected clients.
Enabling Layer 2 portal authentication
Before enabling Layer 2 portal authentication, make sure the following requirements are met:
• The listening IP address of the local portal server is specified.
• Layer 3 portal authentication is not enabled on any interface.
To enable Layer 2 portal authentication:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter Layer 2 Ethernet
interface view.
interface
interface-type
interface-number
N/A
3. Enable Layer 2 portal
authentication on the port.
portal local-server enable
Not enabled by default.
NOTE:
To ensure normal operation of portal authentication on a Layer 2 port, do not enable port security,
guest VLAN of 802.1X, or EAD fast deployment of 802.1X on the port.
Enabling Layer 3 portal authentication
Configuration guidelines
• You cannot enable portal authentication on a Layer 3 interface added to an aggregation group,
nor can you add a portal-enabled Layer 3 interface to an aggregation group.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English