To Next Page

To Previous Page

325

[RouterA-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the

keys for communication with the servers.

[RouterA-radius-rs1] primary authentication 192.168.0.112

[RouterA-radius-rs1] primary accounting 192.168.0.112

[RouterA-radius-rs1] key authentication simple radius

[RouterA-radius-rs1] key accounting simple radius

[RouterA-radius-rs1] user-name-format without-domain

# Configure the IP address of the security policy server.

[RouterA-radius-rs1] security-policy-server 192.168.0.113

[RouterA-radius-rs1] quit

2. Configure an authentication domain:

# Create an ISP domain named dm1 and enter its view.

[RouterA] domain dm1

# Configure AAA methods for the ISP domain.

[RouterA-isp-dm1] authentication portal radius-scheme rs1

[RouterA-isp-dm1] authorization portal radius-scheme rs1

[RouterA-isp-dm1] accounting portal radius-scheme rs1

[RouterA-isp-dm1] quit

# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a

username without any ISP domain at logon, the authentication and accounting methods of the

default domain are used for the user.

[RouterA] domain default enable dm1

3. Configure ACL 3000 for resources on subnet 192.168.0.0/24 and ACL 3001 for Internet

resources:

[RouterA] acl number 3000

[RouterA-acl-adv-3000] rule permit ip destination 192.168.0.0 0.0.0.255

[RouterA-acl-adv-3000] rule deny ip

[RouterA-acl-adv-3000] quit

[RouterA] acl number 3001

[RouterA-acl-adv-3001] rule permit ip

[RouterA-acl-adv-3001] quit

Make sure you specify ACL 3000 as the isolation ACL and ACL 3001 as the security ACL on the

security policy server.

4. Configure extended portal authentication:

# Configure the portal server as follows:

{ Name: newpt

{ IP address: 192.168.0.111

{ Key: portal, in plain text

{ Port number: 50100

{ URL: http://192.168.0.111:8080/portal

[RouterA] portal server newpt ip 192.168.0.111 key simple portal port 50100 url

http://192.168.0.111:8080/portal

# Enable portal authentication on the interface connecting Router B.

[RouterA] interface ethernet 1/2

[RouterA–Ethernet1/2] portal server newpt method layer3

[RouterA–Ethernet1/2] quit

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English

HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

Table of Contents

Other manuals for HPE FlexNetwork MSR Series

Questions and Answers:

HPE FlexNetwork MSR Series Specifications

Related product manuals