383
[RouterB-luser-client001] service-type ssh
[RouterB-luser-client001] quit
# Create an SSH user client001 with the service type scp and the authentication method
password. (Optional. If an SSH user is not created, password authentication is used by
default.)
[RouterB] ssh user client001 service-type scp authentication-type password
2. Configure an IP address for Ethernet 1/1.
<RouterA> system-view
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ip address 192.168.0.2 255.255.255.0
[RouterA-Ethernet1/1] quit
[RouterA] quit
3. Connect to the SCP server, download the file remote.bin from the server, and save it locally to
the file local.bin.
<RouterA> scp 192.168.0.1 get remote.bin local.bin
Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
Enter password:
18471 bytes transfered in 0.001 seconds.