HPE FlexNetwork MSR Series

47
Step Command Remarks
4. Specify the
authentication method
for DVPN users.
• In non-FIPS mode:
authentication dvpn { local | none |
radius-scheme radius-scheme-name
[ local ] }
• In FIPS mode:
authentication dvpn { local |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default authentication
method is used by default.
5. Specify the
authentication method
for LAN users.
• In non-FIPS mode:
authentication lan-access { local |
none | radius-scheme
radius-scheme-name [ local | none ] }
• In FIPS mode:
authentication lan-access { local |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default authentication
method is used by default.
6. Specify the
authentication method
for login users.
• In non-FIPS mode:
authentication login
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme
radius-scheme-name [ local ] }
• In FIPS mode:
authentication login
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default authentication
method is used by default.
7. Specify the
authentication method
for portal users.
• In non-FIPS mode:
authentication portal { local | none |
radius-scheme radius-scheme-name
[ local ] }
• In FIPS mode:
authentication portal { local |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default authentication
method is used by default.
8. Specify the
authentication method
for PPP users.
• In non-FIPS mode:
authentication ppp
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme
radius-scheme-name [ local ] }
• In FIPS mode:
authentication ppp
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default authentication
method is used by default.
9. Specify the
authentication method
for SSL VPN users.
authentication ssl-vpn radius-scheme
radius-scheme-name
Optional.
The default authentication
method is used by default.
10. Specify the
authentication method
for privilege level
switching.
authentication super
{
hwtacacs-scheme
hwtacacs-scheme-name |
radius-scheme
radius-scheme-name }
Optional.
The default authentication
method is used by default.