HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

59
Figure 16 Adding the router as an access device
2. Add a user account for device management:
a. Click the User tab.
b. From the navigation tree, select Access User View > Device Mgmt User.
c. Click Add to configure a device management account as follows:
− Enter the account name hello@bbb and specify the password.
− Select the service type Telnet.
− Set the EXEC privilege level to 3. This argument identifies the privilege level of the
Telnet user after login and defaults to 0.
− Specify 10.1.1.0 to 10.1.1.255 as the IP address range of the hosts to be managed. The
IP address range must contain the IP address of the access device.
d. Click OK.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English