Chapter 2. Installation and system setup
This section describes the steps to install your SurePOS 700.
Before you begin
Read this information before you begin your installation.
Supported operating systems
This product supports the following operating systems:
v 4690 OS (V3R3 or later)
v IBM PC DOS 2000 (including DBCS versions)
v Windows 2000 client with latest service packs
v Windows XP with latest service packs
v Windows XP embedded with latest service packs
v Linux (2.4.4 kernel, Red Hat 7.3)
Determining your configuration
You can set up your system units in either an integrated or distributed configuration.
An integrated configuration is one in which all parts of a system are assembled in
one location. A distributed configuration is one in which you set up parts of the
system in different physical locations. In an integrated configuration, you can use
the slanted I/O tray option for the wide units to contain peripheral devices, such as
printers and displays, on top of wide-footprint system units. There are also slanted
I/O tray options that you can mount on the full-size cash drawer or directly on the
counter.
Your order and packaging
Each order includes the following components:
v System unit
v LAN patch cable; 4.2 m (14 ft), Category 5
v Country-specific power cord
v Cover kit
v Factory install options, such as direct-access storage devices (DASDs), extra
memory
v Safety manual
v Customer-installed options
Note:
All publications are also available from the Web site at
www.ibm.com/solutions/retail/store
Updated October 31, 2007
© Copyright IBM Corp. 2003, 2007 25
To Next Page
Loading...
Need help?
General
