Installing a feature card
To install a feature card:
1. Follow the instructions in “Cover removal procedures” on page 45.
2. Follow the instructions in “Top plate removal” on page 49.
3. See Figure 42 to locate the feature card slots. Align the feature card connectors
with the slots. Insert the card firmly into the slots.
4. Insert the retaining screw (P in Figure 42).
P
Figure 42. Installing feature cards
Updated October 31, 2007
50 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
To Next Page
Loading...
