IBM V7000 User Manual

200 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
After clicking the System Details, the window shown in Figure 5-14 is displayed. It shows the
upper level of the Details section of IBM Flex System V7000 Storage Node. From here, the
firmware level, host name, and capacity usage can be reviewed and changed. Clicking the
Actions button here gives a number of options. For example, the system can be identified
with a beacon on the front of the system, and the system firmware can be upgraded.
Figure 5-14 System Details view

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities