IBM V7000 User Manual

230 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
As with a number of other windows, you can use the command buttons or you can select a
host and right-click it to access the commands (Figure 5-47).
Figure 5-47 Actions for a single host from the Hosts menu
Figure 5-48 shows an example of Modify Mappings. The selected Windows server has no
mappings and we select a volume for to be mapped to the server. From this menu we can
also map more volumes or we can unmap volumes already mapped.
Figure 5-48 Modify Mappings

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities