IBM V7000 User Manual

292 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Using the IBM Flex System V7000 Storage Node Storage Migration Wizard, you can easily
migrate your existing data. Perform the following steps:
1. Follow Step 1 of the Storage Migration Wizard to check the restrictions and prerequisites,
and click Next as shown in Figure 7-10.
Figure 7-10 Storage Migration Wizard step 1- Before You Begin window
Figure 7-10 shows there are some restrictions and prerequisites to using the Storage
Migration Wizard:
– Restrictions:
• Do not use the Storage Migration Wizard to migrate cluster hosts, including clusters
of VMware hosts and VIOS.
• Do not use the Storage Migration Wizard to migrate SAN Boot images.
Avoiding data loss: To avoid any potential data loss, back up all the data stored on
your external storage before using the wizard.

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities