IBM V7000 User Manual

294 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
3. Step 3 of the Storage Migration Wizard is to complete the mapping of external storage
LUNS (Figure 7-12). Make sure that you record the information mentioned in this step,
as you need it in a later step. Click Next.
Figure 7-12 Storage Migration Wizard step 3 - Map Storage
After you click Next, IBM Flex System V7000 Storage Node starts to discover external
devices (if you have correctly zoned the external storage systems with IBM Flex System
V7000 Storage Node and mapped the LUNs). When the discovery completes, IBM Flex
System V7000 Storage Node displays the MDisks discovered.
SCSI ID: You might need to record the SCSI ID of the volume to which the host is
mapped. Some operating systems do not support changing the SCSI ID during
the migration.

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities