IBM V7000 User Manual

358 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
򐂰 The Member Drives tab is only used with array MDisks. In the Member Drives tab, you find
all the member drives of this MDisk (Figure 8-58). Also, all actions described in 8.1.1,
“Actions on internal drives” on page 318 can be performed on the drives listed here.
Figure 8-58 Member Drives tab
򐂰 The Dependent Volumes tab lists all volumes using extents on this MDisk as shown in
Figure 8-59.
Figure 8-59 Dependent volumes

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities