IBM V7000 User Manual

362 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
After you delete a pool, all associated volumes and their host mappings are removed.
Figure 8-64 shows that the MDisks in the Migration Pool are returned to the
Not in a Pool
MDisk group.
Figure 8-64 The image mode MDisk returns as Not in a Pool
All the managed or image mode MDisks in the pool return to a status of unmanaged after the
pool is deleted. If an MDisk pool is deleted, all the array mode MDisks (Internal disks) in the
pool are removed and all the member drives return to
Candidate status.
Important: After you delete the pool, all the data in the pool is lost except for the image
mode MDisks. Their volume definition is deleted, yet the data on the imported MDisk
remains untouched.

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities