IBM V7000 User Manual

440 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Switching a consistency group
As with the switch action on the Remote Copy relationship, you can switch the copy direction
of the consistency group as well. To switch the copy direction of the consistency group, click
Switch from the Actions drop-down menu (Figure 9-113).
Figure 9-113 Switch the copy direction of a consistency group
A warning message opens (Figure 9-114). After the switch, the primary cluster in the
consistency group is changed. Write access to current master volumes is lost, while write
access to the current auxiliary volumes is enabled. Make sure that these settings are what
you need, and if so, click OK to continue.
Figure 9-114 Warning message to confirm the switch

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities