WindO/I-NV4 User’s Manual 10-125
6 Message Switching Display
10
Data Displays
● Format Ta b
■ Font
Selects the font used for displaying text from the following.
Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, Cyrillic, Stroke
The characters that can be displayed depend on the font. For details, refer to Chapter 2 “1.2 Available Text” on page
2-6.
■ Size
Sets the character size (8 to 128).
Can only be set when Stroke is selected.
■ Style
Selects Regular or Bold for text style.
Can only be set when Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, or
Cyrillic is selected for Font.
■ Magnification
Can only be set when Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, or
Cyrillic is selected for Font.
■ Align Text Horizontal
Selects the text alignment in the horizontal direction from the following.
Left, Center, Right, Center-Left, Left-Right
If Top, Center or Bottom is selected for Align Text Vertical, Center or Right can be set as this option.
If Center-Top is selected for Align Text Vertical, Center-Le
f
t or Left-Right can be set as this option.
For details, refer to Appendix “5 Text Alignment” on page A-7.
■ Align Text Vertical
Selects the text alignment in the vertical direction from the following.
Top, Center, Bottom, Center-Top
Set to Center when the Vertical Writing check box is selected.
For details, refer to Appendix “5 Text Alignment” on page A-7.
W, H: Selects text magnification (0.5, 1 to 8).
To Next Page
Loading...
Need help?
General
