•
The pipetting arm will move to the rinsing well before returning to the new adjusted position :
•
Check the probe position.
•
Click on .
The pipetting arm will move to the rinsing well.
A message confirming completion of the procedure is displayed :
•
Click on to validate this message. The message displays:
•
Remove the activation key. The removal is detected by the analyser and the message is displayed:
Maintenance
5-4- Analyser Interventions (continued)
IDS-iSYS User Manual - Revision M1!
Maintenance 5-4
139
Software version V 14
To Next Page