Inovance IS810N-INT Series - Basic Settings of the Omron NJ Controller for OMET

IS810N-INT Series Servo System User Manual (Brief) Chapter 6 Commissioning Software
- 204 -
6.3.3 Basic Settings of the Omron NJ Controller for OMET
1. Create a project and modify the project name as well as the model and version information
of the controller. Note: The model and version information of the controller can be obtained
from the nameplate of the controller.
2.1 Network Congurations
2.1.1. After creating a project, right-click the master icon on the EtherCAT device interface
to open the short-cut menu, and click
Display ESI Library
to import the device
description le.
Ino_MultiAxesDriv
e_ECAT_V0.40.xml
Note: Please download the latest
XML
le for IS810N from Inovance’s ofcial website.