Inovance IS810N-INT Series - 3.2 Servo Drive Installation

IS810N-INT Series Servo System User Manual (Brief)Chapter 3 Installation
- 61 -
3.2 Servo Drive Installation
3.2.1 Cabinet-mounted Installation
This product can be installed in a cabinet in a single-row or two-row installation manner. A
book-type unit must be installed closely to avoid product damages during transportation. Do
not install merely two or less servo drives. An insulation deector may be installed on the
upper unit layer in two-row installation. The through-hole mounting method supports only
single-row installation.
Single-row installation
Book-type unit Vertical unit