IS810N-INT Series Servo System User Manual (Brief)Chapter 3 Installation
- 55 -
• Environmental conditions
Table 3-1 Installation environment
Item Description
Ambient temperature
Operating temperature: -10 to 50°C, air temperature change: less
than 0.5°C/min; derated when the temperature is higher than 40°C,
1.5% deration of rated current per 1°C temperature rise; maximum
temperature: 50°C
Storage temperature: -25°C to 70°C
Transportation temperature: -25°C to 70°C
Operating humidity: 5% to 95%, standard
Relative operating
humidity
Operating humidity: 5% to 95%. A standard servo drive is not
applicable in an environment or place with corrosive gas.
Please purchase a special servo drive with corrosion resistant
casing and protective coating.
Storage humidity: 5% to 95%
Transportation humidity: below 95% at 40 °C.
Degree of protection IP20
Altitude
1000 m; derated when above 1000 m; 1% deration per 100 m rise;
maximum: 3000 m.
To Next Page
Loading...
