Inovance IS810N-INT Series - Page 78

IS810N-INT Series Servo System User Manual (Brief) Chapter 3 Installation
- 78 -
2) Solid shaft, forced ventilation motor (ISMG2) (Unit: mm)
Standard accessories: Type A Round parallel key 12 * 8 * 56
Refer to GB/T1096-2003
Connector Encoder Side
Military spec. MIL-DTL-5015 series 3102E20-29P
Motor Model L (mm) K (mm) Weight (kg)
ISMG2-31D15CD-A331FA
ISMG2-42D20CD-A331FA
575 360 122
ISMG2-42D15CD-A331FA
ISMG2-57D20CD-A331FA
625 370 141.3
ISMG2-52D15CD-A331FA
ISMG2-70D20CD-A331FA
675 476 158.4
ISMG2-60D15CD-A331FA
ISMG2-80D20CD-A331FA
725 476 175.4
ISMG2-80D15CD-A331FA
ISMG2-11E20CD-A331FA
825 583 217
ISMG2-94D15CD-A331FA 950 590 267
Note:
The standard is A3 series. If you require R1, U1 or U2 series, contact Inovance for
customization.
The mounting baseplate is optional, and used only when required.