Inovance MD800 Series - Page 179

Para.
No.
Address
Name
Value Range
Default
Unit
Change
Page
FA-23 64023
Maximum deviation
between two PID
outputs in forward
direction
0.00% to 100.00% 1.00 % At once
“
FA-23 ”
on page
320
FA-24 64024
Maximum deviation
between two PID
outputs in reverse
direction
0.00% to 100.00% 1.00 % At once
“
FA-24 ”
on page
320
FA-25 64025
PID integral property
0: Disabled
1: Enabled
0 - At once
“
FA-25 ”
on page
320
FA-26 64026
Detection level of PID
feedback loss
0.0% to 100.0% 0.0 % At once
“
FA-26 ”
on page
321
FA-27 64027
Detection time of PID
feedback loss
0.0s to 20.0s 0.0 s At once
“
FA-27 ”
on page
321
FB-00 64256
Wobble setting mode
0: Relative to center frequency
1: Relative to maximum frequency
0 - At once
“
FB-00 ”
on page
321
FB-01 64257
Wobble amplitude
0.0% to 100.0% 0.0 % At once
“
FB-01 ”
on page
322
FB-02 64258
Wobble step
0.0% to 50.0% 0.0 % At once
“
FB-02 ”
on page
322
FB-03 64259
Wobble cycle
0.1s to 3000.0s 10.0 s At once
“
FB-03 ”
on page
322
FB-04 64260
Triangular wave rise time
coefficient
0.1% to 100.0% 50.0 % At once
“
FB-04 ”
on page
322
FB-05 64261
Reference length
0 m to 65535 m 1000 m At once
“
FB-05 ”
on page
322
FB-06 64262
Actual length
0 m to 65535 m 0 m At once
“
FB-06 ”
on page
323
FB-07 64263
Number of pulses per
meter
0.1 to 6553.5 100.0 - At once
“
FB-07 ”
on page
323
FB-08 64264
Reference count value
1 to 65535 1000 - At once
“
FB-08 ”
on page
323
List of Drive Unit Parameters
-178-