Parameter Group
-307-
1: Decelerate to stop
The AC drive decelerates to stop.
4: Warning
The AC drive continues to run.
5: Disabled
Fault detection is disabled.
F9-52
Fault protection action selection 5
Address:
63796
Min.:
0
Unit:
-
Max.: 55555 Data type: UInt16
Default:
551
Change:
At stop
Value Range:
Ones: PID feedback loss during running
(E31)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Disabled
Tens: Reserved
5: Disabled
Hundreds: Reserved
5: Disabled
Thousands: Excessive speed deviation
(E42)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Disabled
Ten thousands: Motor overspeed (E43)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Disabled
Description
The fault protection actions are set by the ones, tens, hundreds, thousands, and ten thousands places
of this parameter.
0: Coast to stop
The AC drive coasts to stop.
1: Decelerate to stop
The AC drive decelerates to stop.
4: Warning
The AC drive continues to run.
5: Disabled
Fault detection is disabled.
F9-53
Fault protection action selection 6
Address:
63797
Min.:
0
Unit:
-
To Next Page
Loading...
