Inovance MD800 Series - Page 72

Parameter Group
-71-
FD-12
CAN baud rate
Address:
64780
Min.:
0
Unit:
-
Max.: 6 Data type: UInt16
Default:
5
Change:
At once
Value Range:
0: 20 kbps
1: 50 kbps
2: 100 kbps
3: 125 kbps
4: 250 kbps
5: 500 kbps
6: 1 Mbps
Description
This parameter defines the baud rate for CAN communication, including CANlink and CANopen
communication. In the same network, baud rates of all stations must be consistent. Otherwise,
communication will fail.
FD-13
CAN station number
Address:
64781
Min.:
1
Unit:
-
Max.: 127 Data type: UInt16
Default:
16
Change: Unchangeable
Value Range:
1 to 127
Description
This parameter defines the CAN station number, including station numbers for CANlink and CANopen
communication. In the same network, all station numbers must be unique. Otherwise,
communication will fail.
FD-14
Number of CAN frames received per unit time (real-time)
Address:
64782
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter is used to monitor the bus load. It defines the number of CAN frames received by the
station per second.
FD-15
Maximum value of node reception error counter (real-time)
Address:
64783
Min.:
0
Unit:
-
Max.:
65535
Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter is used to monitor bus errors. It defines the maximum value of the CAN reception
error counter of the node.