VIsualEyes 515/525 - Additional Information Page 84
Figure 8.2.2 Gaze subtest settings
Test Name: Name of subtest
Duration: Define how long the eye movement is to be recorded and analyzed (in seconds).
Fixation light: Determines when the fixation light in the goggles is displayed. Manual (default) will leave the
operator to determine when the fixation light should be displayed. Timed will have the fixation light come on
automatically at the designated time.
Save Eye Recording: Choice to save eye video recordings.
Target Direction: Defines direction of target movement.
Extend end of Recording: If enabled the test will return the target back to center for two seconds. Not
recommended if the tests are run automatically.
To Next Page
Loading...
