VIsualEyes 515/525 - Additional Information Page 83
8.2 Configuring oculomotor tests
8.2.1 Configuring the gaze test
Figure 8.2.1 Gaze summary settings
Test Name: Name of the test
Results Displayed: Selects which eye is shown by default. Mixed Eyes will allow the user to choose the
best eye for each subtest. Left Eye will set each subtest to display the left eye. Right Eye will set each
subtest to display the right eye.
Run Tests Automatically: If enabled, when the subtest completes, the next subtest will be loaded and
started automatically. This makes the Gaze test function similarly to the Calibration test.
Active Tests: The subtests selected will appear in the testing screen. The configuration gear button beside
each test will open the subtest settings. By default the active tests would be Center, Left, Right, Up, and
Down. Center 2 is optional for a follow-up center gaze.
Gaze Target Settings:
Target Size: Adjusts size of target in degree increments. Note if the target size is increased, the maximum
angle will decrease.
Target Type: Selects the stimulus for all Gaze subtests (circle of solid color, flower, potato head, or smiley
face).
Target Color: If the target type is set to color, this option will change the target color.
Background color: Select different colors for the background.
To Next Page
Loading...
