To Next PageTo Next Page
Need help?Do you have a question about the Invacare ProSPIN X4 and is the answer not in the manual?
Identifies standard labels and their locations on the wheelchair frame.
Details label placement for wheelchairs equipped with TRRO (Transport Ready Restraint Option).
Details label placement for wheelchairs not equipped with TRRO.
Explains how various factors affect wheelchair stability and the need for technician adjustments.
Outlines that all service and adjustments should be done by a qualified technician.
Provides crucial safety warnings and instructions for operating the wheelchair.
Stresses the importance of correct tire pressure for safety and performance.
Clarifies that wheelchairs are not designed for weight training and voids warranty.
Specifies the maximum weight capacity for the wheelchair.
Provides a detailed checklist for initial setup and ongoing safety inspections.
Introduces general safety practices and techniques for wheelchair operation.
Discusses factors affecting stability and warnings against tip-over risks.
Offers advice on navigating common obstacles safely.
Provides guidance on proper body mechanics for assistants.
Details safe procedures for transferring between the wheelchair and other seats.
Explains how weight distribution impacts wheelchair stability.
Describes how wheelbase adjustment affects stability and maneuverability.
Warns against movements that can cause tipping when reaching forward.
Warns against movements that can cause tipping when reaching backward.
Addresses the risks of tipping and the need for assistance.
Explains the technique for tipping the wheelchair over curbs with assistance.
Provides instructions and warnings for moving the wheelchair up/down stairs.
Step-by-step guide for unfolding and folding the wheelchair safely.
Explains how to properly engage and disengage wheel locks for safety.
Instructions for attaching and detaching front rigging components like footrests.
Details how to install, remove, and adjust conventional armrests.
General advice on keeping the wheelchair in good condition and secure.
Lists recommended procedures for regular wheelchair maintenance.
Provides structured checklists for weekly, monthly, and periodic inspections.
Specific checks and adjustments recommended for weekly maintenance.
Specific checks and adjustments recommended for monthly maintenance.
Specific checks and adjustments recommended for periodic maintenance.
Identifies common issues and their potential solutions for the wheelchair.
Instructions on how to replace or adjust the wheelchair's wheel locks.
Details how to relocate the wheel lock handle for user preference or ease of use.
Explains the procedure to change the wheel lock engagement mechanism.
Guide on adjusting the height of the footrests for proper user positioning.
Instructions for installing the hinge mechanism for adjustable footplates.
Details how to adjust the depth and angle of flip-up footplates.
Specific instructions for adjusting angle and depth of flip-up footrests.
Step-by-step guide to adjust the vertical height of the footplates.
Instructions on how to operate the flip-up footrest mechanism.
Covers adjustments for elevating legrests and calf pads for comfort.
Instructions for replacing the heel loop component of the footrest.
Guide for attaching impact guards and optional calf straps.
Comprehensive guide for armrest installation, removal, and height adjustment.
Detailed steps for adjusting the height of the armrests.
Instructions for replacing the padded part of the armrest.
Guide for installing and removing T-shaped armrests.
Covers height, width, and depth adjustments for T-arms.
Details how to adjust the width of the T-arm assembly.
Details how to adjust the depth of the T-arm assembly.
Instructions for adjusting the T-arm sockets for a secure fit.
Guide for adjusting T-arm accessories like transfer assists and side guards.
Instructions for installing arm sockets for swingaway padded armrests.
Details how to adjust the height of swingaway padded armrests.
Instructions for removing and installing the back support canes.
Guide on how to adjust the height of the wheelchair back support.
Instructions for adjusting the angle of the adjustable back support.
Details on installing and removing the chest positioning strap.
Instructions for removing and installing the standard back upholstery.
Information on adjustable back upholstery, including tension straps.
Step-by-step guide for installing or replacing adjustable back upholstery.
General guidance for installing or removing a complete back system.
Instructions for removing and installing the seat upholstery.
Guide for installing or removing the seat positioning strap.
Instructions for installing fabric clothing guards to protect clothing.
Details on installing rigid clothing guards.
General guidance for installing or removing a seating system.
Step-by-step instructions for removing and installing the rear wheels.
Details the procedure for removing/installing rear wheels with permanent axles.
Guide on how to adjust quick-release axles for proper fit and function.
Instructions for installing quad-release axles onto the wheelchair.
Details how to adjust the handles on quad-release axles.
Instructions to eliminate side-to-side movement in the rear wheels.
Explains how to adjust the camber angle of the rear wheels.
Information on how axle height affects seat height and how to adjust it.
Guide for adjusting axle height by repositioning bushings or plates.
Detailed steps for installing or repositioning axle components for height adjustment.
Instructions for installing an amputee bracket for axle plate mounting.
Guide on adjusting the wheelbase width for stability and maneuverability.
Instructions for adjusting the wheelbase length for stability.
Guide for replacing or adjusting handrims on spoke rear wheels.
Instructions for replacing handrims on composite rear wheels.
States that tire/tube replacement must be done by a qualified technician.
Instructions for removing, installing, or repositioning caster assemblies.
Specific procedures for standard caster forks.
Specific procedures for suspension caster forks.
Guide on adjusting fork tension to prevent caster flutter.
Instructions for modifying caster height using spacers.
Guide for removing and installing the entire fork assembly.
Details on installing fork assemblies and height adjustment spacers.
Instructions for removing and installing the fork stem assembly.
Guide on checking and adjusting the fork stem angle for proper alignment.
Instructions for working with elastomers specific to suspension forks.
Instructions for installing and removing the anti-tipper devices.
Guide for installing and removing the bracket that holds the anti-tippers.
Details on adjusting the height of the anti-tipper wheels for proper clearance.
Specific steps for adjusting the anti-tipper wheel position.
Instructions for adjusting the anti-tipper bracket's position or angle.
Explains how to measure seat dump and the importance of proper height difference.
Provides instructions on how to accurately measure front and rear seat-to-floor heights.
Introduces adjustments to seat height and their impact on stability.
Details methods for changing the front seat-to-floor height using caster adjustments.
Details methods for changing the rear seat-to-floor height using axle adjustments.
Describes transport-ready packages and crash-testing information.
States compliance with ANSI/RESNA WC Vol. 1 Section 19 standards.
Lists size requirements for occupying the wheelchair in a motor vehicle.
Specifies the weight limit for the wheelchair when used in a vehicle.
Instructions on positioning the wheelchair correctly in a vehicle for transport.
Identifies the tie-down brackets used for securing the wheelchair in a vehicle.
Details the use of WTORS and manufacturer instructions for vehicle securement.
Instructions for securing the occupant using wheelchair-anchored belts.
Specifics on using the provided pelvic belt and connecting upper torso belts.
Information on the wheelchair's rating for accommodating vehicle-anchored belts.
Notes that the wheelchair was tested with the factory installed seating system only.
Guidance on proper positioning of pelvic and torso belts for safety.
Identifies standard labels and their locations on the wheelchair frame.
Details label placement for wheelchairs equipped with TRRO (Transport Ready Restraint Option).
Details label placement for wheelchairs not equipped with TRRO.
Explains how various factors affect wheelchair stability and the need for technician adjustments.
Outlines that all service and adjustments should be done by a qualified technician.
Provides crucial safety warnings and instructions for operating the wheelchair.
Stresses the importance of correct tire pressure for safety and performance.
Clarifies that wheelchairs are not designed for weight training and voids warranty.
Specifies the maximum weight capacity for the wheelchair.
Provides a detailed checklist for initial setup and ongoing safety inspections.
Introduces general safety practices and techniques for wheelchair operation.
Discusses factors affecting stability and warnings against tip-over risks.
Offers advice on navigating common obstacles safely.
Provides guidance on proper body mechanics for assistants.
Details safe procedures for transferring between the wheelchair and other seats.
Explains how weight distribution impacts wheelchair stability.
Describes how wheelbase adjustment affects stability and maneuverability.
Warns against movements that can cause tipping when reaching forward.
Warns against movements that can cause tipping when reaching backward.
Addresses the risks of tipping and the need for assistance.
Explains the technique for tipping the wheelchair over curbs with assistance.
Provides instructions and warnings for moving the wheelchair up/down stairs.
Step-by-step guide for unfolding and folding the wheelchair safely.
Explains how to properly engage and disengage wheel locks for safety.
Instructions for attaching and detaching front rigging components like footrests.
Details how to install, remove, and adjust conventional armrests.
General advice on keeping the wheelchair in good condition and secure.
Lists recommended procedures for regular wheelchair maintenance.
Provides structured checklists for weekly, monthly, and periodic inspections.
Specific checks and adjustments recommended for weekly maintenance.
Specific checks and adjustments recommended for monthly maintenance.
Specific checks and adjustments recommended for periodic maintenance.
Identifies common issues and their potential solutions for the wheelchair.
Instructions on how to replace or adjust the wheelchair's wheel locks.
Details how to relocate the wheel lock handle for user preference or ease of use.
Explains the procedure to change the wheel lock engagement mechanism.
Guide on adjusting the height of the footrests for proper user positioning.
Instructions for installing the hinge mechanism for adjustable footplates.
Details how to adjust the depth and angle of flip-up footplates.
Specific instructions for adjusting angle and depth of flip-up footrests.
Step-by-step guide to adjust the vertical height of the footplates.
Instructions on how to operate the flip-up footrest mechanism.
Covers adjustments for elevating legrests and calf pads for comfort.
Instructions for replacing the heel loop component of the footrest.
Guide for attaching impact guards and optional calf straps.
Comprehensive guide for armrest installation, removal, and height adjustment.
Detailed steps for adjusting the height of the armrests.
Instructions for replacing the padded part of the armrest.
Guide for installing and removing T-shaped armrests.
Covers height, width, and depth adjustments for T-arms.
Details how to adjust the width of the T-arm assembly.
Details how to adjust the depth of the T-arm assembly.
Instructions for adjusting the T-arm sockets for a secure fit.
Guide for adjusting T-arm accessories like transfer assists and side guards.
Instructions for installing arm sockets for swingaway padded armrests.
Details how to adjust the height of swingaway padded armrests.
Instructions for removing and installing the back support canes.
Guide on how to adjust the height of the wheelchair back support.
Instructions for adjusting the angle of the adjustable back support.
Details on installing and removing the chest positioning strap.
Instructions for removing and installing the standard back upholstery.
Information on adjustable back upholstery, including tension straps.
Step-by-step guide for installing or replacing adjustable back upholstery.
General guidance for installing or removing a complete back system.
Instructions for removing and installing the seat upholstery.
Guide for installing or removing the seat positioning strap.
Instructions for installing fabric clothing guards to protect clothing.
Details on installing rigid clothing guards.
General guidance for installing or removing a seating system.
Step-by-step instructions for removing and installing the rear wheels.
Details the procedure for removing/installing rear wheels with permanent axles.
Guide on how to adjust quick-release axles for proper fit and function.
Instructions for installing quad-release axles onto the wheelchair.
Details how to adjust the handles on quad-release axles.
Instructions to eliminate side-to-side movement in the rear wheels.
Explains how to adjust the camber angle of the rear wheels.
Information on how axle height affects seat height and how to adjust it.
Guide for adjusting axle height by repositioning bushings or plates.
Detailed steps for installing or repositioning axle components for height adjustment.
Instructions for installing an amputee bracket for axle plate mounting.
Guide on adjusting the wheelbase width for stability and maneuverability.
Instructions for adjusting the wheelbase length for stability.
Guide for replacing or adjusting handrims on spoke rear wheels.
Instructions for replacing handrims on composite rear wheels.
States that tire/tube replacement must be done by a qualified technician.
Instructions for removing, installing, or repositioning caster assemblies.
Specific procedures for standard caster forks.
Specific procedures for suspension caster forks.
Guide on adjusting fork tension to prevent caster flutter.
Instructions for modifying caster height using spacers.
Guide for removing and installing the entire fork assembly.
Details on installing fork assemblies and height adjustment spacers.
Instructions for removing and installing the fork stem assembly.
Guide on checking and adjusting the fork stem angle for proper alignment.
Instructions for working with elastomers specific to suspension forks.
Instructions for installing and removing the anti-tipper devices.
Guide for installing and removing the bracket that holds the anti-tippers.
Details on adjusting the height of the anti-tipper wheels for proper clearance.
Specific steps for adjusting the anti-tipper wheel position.
Instructions for adjusting the anti-tipper bracket's position or angle.
Explains how to measure seat dump and the importance of proper height difference.
Provides instructions on how to accurately measure front and rear seat-to-floor heights.
Introduces adjustments to seat height and their impact on stability.
Details methods for changing the front seat-to-floor height using caster adjustments.
Details methods for changing the rear seat-to-floor height using axle adjustments.
Describes transport-ready packages and crash-testing information.
States compliance with ANSI/RESNA WC Vol. 1 Section 19 standards.
Lists size requirements for occupying the wheelchair in a motor vehicle.
Specifies the weight limit for the wheelchair when used in a vehicle.
Instructions on positioning the wheelchair correctly in a vehicle for transport.
Identifies the tie-down brackets used for securing the wheelchair in a vehicle.
Details the use of WTORS and manufacturer instructions for vehicle securement.
Instructions for securing the occupant using wheelchair-anchored belts.
Specifics on using the provided pelvic belt and connecting upper torso belts.
Information on the wheelchair's rating for accommodating vehicle-anchored belts.
Notes that the wheelchair was tested with the factory installed seating system only.
Guidance on proper positioning of pelvic and torso belts for safety.
General| Brand | Invacare |
|---|---|
| Model | ProSPIN X4 |
| Category | Wheelchair |
| Language | English |
