SECTION 9—BACK
Part No 1125104 61 ProSPIN™ X4™
Installing/Replacing Adjustable Back Upholstery
NOTE:Forthisprocedure,refertoFIGURE9.6onpage62.
Installing
1. Removetheexistingbackupholsteryfromthewheelchair.RefertoRemoving/
InstallingtheStandardBackUpholsteryonpage 59.
2. Slideeachsection(anchorloop/adjusterstrap)oftheadjustablebackupholsterywith
thegrommetholefacingtherearofthewheelchair.
3. Securetheadjustablebackupholsterytothebackcaneswiththetwomounting
screws.
NOTE:Cleantheupholsterywithwarmwaterandmilddetergenttoremovesuperficialsoil.
WARNING
After the adjustable back upholstery has been positioned to the end-users individual
needs, the fastening straps MUST be securely fastened before applying the back
upholstery cover. The adjustable back should be checked whenever entering the
wheelchair to ensure that the fastening straps are securely fastened.
4. Slipadjusterstrapsthroughcorrespondinganchorloopsandadjusttheback
upholstery.Secure withthefasteningstraps.
5. Securethebackupholsterycover(fasteningstrap)tothebackoftheadjustableback
upholstery(fasteningstrap).
6. Flipthebackupholsterycoverovertheadjustablebackupholsteryandsecurethe
fasteningstrapstothefrontoftheadjustablebackupholstery.
7. Laythefrontportionofthebackupholsterycoverontheseatupholstery.
8. Adjusttheslackinthebackupholsterycoverandthensecuretotheseatupholstery.
Replacing
1. Liftupontheexistingbackupholsterycoverandremovethecoverfromthe
wheelchair.
2. Removethetwomountingscrewsandwashersthatsecuretheexistingadjustable
backupholsterytothebackcanes.
3. Slideeachsection(anchorloop/adjusterstrap)oftheexistingadjustableback
upholsteryoffofthebackcanes.
4. Slideeachsection(anchorloop/adjusterstrap)ofthenewadjustablebackupholstery
withthegrommetholefacingtherearofthewheelchair.
5. Securenewadjustablebackupholsterytothebackcaneswiththetwomounting
screwsandwashers.
To Next Page
Loading...
