EasyManua.ls Logo

Invitrogen EVOS M5000 - Prepare for Installation; Receive and Inspect the Shipment; Move the Instrument to the Installation Site; Install the Instrument

Default Icon
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Prepare for installation
Receive and inspect the shipment
1.
Verify that the items shown on the shipping list are the same items that you ordered at the time of
purchase.
2.
Carefully inspect the shipping containers and report any damage to the Thermo Fisher Scientific
service representative. Record any damage or mishandling on the shipping documents.
Move the instrument to the installation site
1.
Clear the installation site of all unnecessary materials.
2.
If possible, move the crated instrument and other shipping containers to the installation site.
CAUTION! PHYSICAL INJURY HAZARD
. Lift or move the instrument using proper lifting
techniques. We recommend that you lift or move the crated instrument with the assistance of others
and the use of appropriate moving equipment. Improper lifting can cause painful and permanent back
injury. Depending on the weight, moving or lifting an instrument may require two or more persons.
Install the instrument
Unpack the instrument
1.
Open the shipping box and remove the accessory box.
2.
Carefully lift the instrument out of the box by grasping it firmly with both hands under the support
arm.
3.
Place the instrument on a flat, level surface that will be free from vibration and leave enough room
ar
ound it for the stage to move freely.
4.
Tilt the LCD monitor upright.
5.
Examine the instrument carefully for damage incurred during transit.
6.
Unpack the accessories box and verify all parts are present. See “Standard items included” on
page
11 for the list of standard items included in the shipment.
IMPORTANT! Do not subject the EVOS
M5000 Imaging System to sudden impact or excessive
vibration. Handle the instrument with care to prevent damage.
Note: Contact your distributor if anything is missing. If you do not have your distributor information,
contact T
echnical Support. Damage claims must be filed with the carrier; the warranty does not cover
in-transit damage.
Chapter3Installation
Prepare for installation
3
EVOS
M5000 Imaging System User Guide
17

Table of Contents

Related product manuals