Invitrogen EVOS M5000 - Mark Pin Locations; Find Pins Using the Find Target Screen

Mark pin locations
1.
Find a point of interest by moving the stage using the knobs.
2.
Once on a desired spot, click (Add pin). This will be Pin 1 or can be custom named by clicking
in the
field next to the
icon. Subsequent pins will be Pin 2, Pin 3, and so on, unless custom
named pr
eviously.
3.
Mark any other points of interest in the vessel by moving the stage, then clicking to add each
pin.
4.
Once all of the desired pins are created, click Find. The large Find Target map will appear showing
a more detailed view of marked pin locations in the vessel.
Find pins using the Find Target screen
The Find Target screen is an expanded view of the small vessel map.
Chapter9Stage View
Mark pin locations
9
EVOS
™
M5000 Imaging System User Guide
81