Chapter 4 Quick setup 70
Parameters description
It specifies the wireless network name of the device.
It specifies the channel that the WiFi network operates.
It specifies the security mode of the WiFi network of the device. It includes None,
WPA-PSK, WPA2-PSK, and Mixed WPA/WPA2-PSK.
Clicking the hyperlink navigates you to the elaborated description of the
corresponding security mode.
5. Click Save, and wait until the CPE reboots to activate the settings.
----End
After the CPE reboots, log in to the Wed UI of the CPE again and choose Status to enter the
page. If the WAN IP address, default gateway and DNS server information obtained by the
WAN port are displayed on the System Status section, the configuration succeeds.
After successful configuration, devices connected to the CPE can access to the internet in a
wired or wireless manner.
To Next Page
Loading...