•
Manual ringdown (MRD) with the speaker on at the far end
If a line in the broadcast is not configured to signal, the speaker must be on at the far end to be included
in the conference, because there is no way to dial or signal the far end when a preset broadcast button is
pressed.
Note
•
Once a broadcast call is established, additional lines can be added or removed using the Conference
button; the Conference button is enabled by default. The original set of lines cannot be removed except
by ending the call.
•
Privacy is not available for broadcast calls.
Preset broadcast must be enabled for an end user group or a specific end user through Unigy
administration.
When this feature is enabled for the system and you have user privileges to program buttons, you can
program the feature on a button in your Favorites.
You must have line buttons in your Favorites app for the private lines you want to add before you can
include those lines on a Conference Broadcast button.
Duplex broadcast does not support unsupervised conferences. Conferences placed on hold are
supervised conferences, even if unsupervised conference is enabled for all of the zones in the enterprise.
If a conference starts as a preset or simplex broadcast conference, when hold is activated, the system
places all lines in the call on individual hold (I-Hold).
Preset broadcast calls are available only for turrets and IQ/MAX Sync.
9.2.1 Configure conference broadcast
Add conference broadcast buttons to your turret so you can make an instant conference of multiple call
parties.
1. If the Favorites application is not already displayed, tap Favorites in the Navbar.
2. Tap an unassigned or empty button.
A contextual menu is displayed with the button types.
3. Tap CONFERENCE.
The Add Button: Conference Button Options dialog is displayed.
4. Select Conference as the button type.
5. Tap the Descriptor field and use the soft keyboard to type the name for the new button.
As soon as you start typing, the Choose Lines button becomes active.
6. Tap Choose Lines.
The keyboard and popup are removed and the favorites are displayed. The top of the favorites shows
0 Lines Selected.
7. Tap each private line to include in this conference broadcast button.
As each line is selected, the button turns blue and the count at the top of the screen is incremented by
1.
8. Tap Done.
The button is created. The button label includes a conference indicator icon and the number of Call
Parties that you included in the conference broadcast.
122 9.2: Duplex conference
August 26, 2019 IPC Proprietary
To Next Page
Loading...
