IPC IQ/MAX TOUCH - Adding Diversion Buttons; Editing Buttons

You can add a simpex button in Favorites. For details, see Simplex broadcast on page 123 and
Configure simplex broadcast on page 123.
4.4.5 Add a diversion button
You can add a diversion button in Favorites. For details, see Configure one-button DDI diversion on
page 114 and Configure one-button ICM diversion on page 113.
4.5 Edit a button
You can edit buttons, except for diversion buttons, in the button sheet.
1. Navigate to the button to be edited in Favorites, and long press this button.
A contextual menu is displayed.
2. Select EDIT.
The dialog that is displayed depends on the type of button you selected.
3. For a line button:
•
The Edit Button: Line Button Options dialog is displayed.
•
Update the information in the dialog as appropriate.
•
Tap Save.
The button is updated accordingly.
4. For a speed dial or point of contact button:
•
The Directory application opens with Choose Point of Contact selection mode, temporarily
overlaying Favorites. The Contact details view is displayed on the right.
•
Select the point of contact that you want to replace as a Favorites button. The following points of
contact can be selected: private wire, speed dial, intercom, and intercom group.
•
Tap Done.
The button is updated accordingly.
5. For a conference button:
•
The Edit Button: Conference Button Options dialog is displayed.
•
Update the information in the dialog as appropriate.
•
Tap Done.
The button is updated accordingly.
6. For a function button:
•
The Edit Button: Function Button Options dialog is displayed.
•
Update the information in the dialog as appropriate.
•
Tap Save.
The button is updated accordingly.
Editing a button is distinct from Edit mode. For information about Edit mode, see Move or swap a
button on page 54.
4.5: Edit a button 53
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide