IPC IQ/MAX TOUCH - Working with Applications and Features; Opening Applications

3 Working with applications and features
3.1 Open an application in full screen view
After you have successfully logged in, you can start or open an application in full screen view.
For an illustration, see Navigation bar area on page 22 and Positioning guide on page 25.
For turrets equipped with only a Primary Module, do one of the following:
•
Tap an application item in the collapsed Navbar.
•
Tap the Navbar handle to see the expanded Navbar, then tap an application item in the expanded
Navbar.
•
Drag an application item from the Navbar and use the positioning guide to open the application in full
screen view.
The application is displayed in full screen (full size) view on the Primary Module, replacing any other
applications that are running.
3.1.1 With an Expansion Module
If an Expansion Module is present, the positioning guide allows you to choose the module on which to
run the application. For an illustration, see Positioning guide on page 25.
•
Using the Navbar, do one of the following:
a) Tap an application item in the collapsed Navbar.
b) Tap the Navbar handle to see the expanded Navbar, then tap an application item in the expanded
Navbar.
c) Tap the box on the left to open the application on the Expansion Module screen.
•
Using the drag and drop method, drag the application item across the primary screen until you
position it over the left-most box.
3.2 Open an application using the positioning guide
After you have successfully logged in, you can open an application, and choose its size and position on
the screen.
For an illustration, see Navigation bar area on page 22, Positioning guide on page 25, and Views of
applications on page 24.
Do one of the following:
•
Drag and drop an application item from the collapsed Navbar.
•
Tap the Navbar handle to see the expanded Navbar, then drag and drop an application item from the
expanded Navbar.
From the Primary Module, the positioning guide appears and you can use it to place the application
(app) anywhere on the screen of the Primary Module, in addition to or replacing an open application.
Your choices are as follows, depending on what is currently running on the screen:
•
If one app is active: replace the app, add to left, or add to right.
37
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide