b) Select an option from the contextual menu; options vary depending on whether a single call is
active or two calls are active.
Add from an active call: Assign the line from the single active call to the speaker channel.
Add call left: Assign the line from the left handset side to the speaker channel.
Add call right: Assign the line from the right handset side to the speaker channel.
The line is assigned to the speaker channel.
3. To replace a speaker channel assignment:
a) Select a speaker channel to be replaced.
b) Tap the > icon in the speaker label of the selected speaker channel.
The contextual menu is displayed.
c) Select an option from the contextual menu; options vary depending on whether a single call is
active or two calls are active.
Replace from an active call: Reassign the line from the single active call to the speaker channel.
Replace call left: Reassign the line from the left handset side to the speaker channel.
Replace call right: Reassign the line from the right handset side to the speaker channel.
d) You are asked to confirm the replace operation.
Once confirmed, the line is reassigned to the speaker channel.
10.6.4 Remove a speaker channel assignment
You can remove a speaker channel assignment from the Speakers application.
1. Tap the Speakers icon in the Navbar.
The Speakers application is displayed. See Speakers on a hard turret on page 128 for an illustration.
2. Select a speaker channel to be removed.
3. Tap the > icon in the speaker label of the speaker channel.
The contextual menu is displayed.
4. Tap Remove Channel.
The channel assignment is removed. The channel is now unassigned.
154 10.6: Set up speaker channels
August 26, 2019 IPC Proprietary
To Next Page
Loading...
