c) Tap Replace from Speaker Directory.
The Speakers directory is displayed.
d) Tap an entry in Speakers directory that you want to reassign to the speaker channel.
The Replace Speaker Channel modal dialog is displayed.
e) Select one of the following:
Cancel: Cancel the replace operation.
Change Selection: Select a different entry in Speakers directory.
Confirm: Confirm the replace operation. Once confirmed, the line is reassigned to the speaker
channel.
10.6.2 Assign or replace a speaker channel from Favorites
Assign a line to an empty speaker channel or replace a speaker channel assignment from Favorites.
1. Tap the Speakers icon in the Navbar.
The Speakers application is displayed. See Speakers on a hard turret on page 128 for an illustration.
2. To assign a line to an empty speaker channel:
a) Tap an empty speaker channel.
The contextual menu is displayed.
b) Tap Add from Favorites.
The Favorites application is displayed, temporarily overlaying the Speakers application.
c) Tap a Favorites button that you want to assign to the speaker channel.
The button is highlighted.
d) Tap Done.
The line is assigned to the speaker channel.
3. To replace a speaker channel assignment:
a) Select a speaker channel to be replaced.
b) Tap the > icon in the speaker label of the selected speaker channel.
The contextual menu is displayed.
c) Tap Replace from Favorites.
The Favorites application is displayed, temporarily overlaying the Speakers application.
d) Tap a Favorites button that you want to reassign to the speaker channel.
The button is highlighted.
e) Tap Done.
f) You are asked to confirm the replace operation.
Once confirmed, the line is reassigned to the speaker channel.
10.6.3 Assign or replace a speaker channel from an active call
Assign a line to an empty speaker channel or replace a channel assignment from an active call.
1. While you are in an active call, tap the Speakers icon in the Navbar.
The Speakers application is displayed. See Speakers on a hard turret on page 128 for an illustration.
2. To assign a line to an empty speaker channel:
a) Tap an empty speaker channel.
The contextual menu is displayed.
10.6: Set up speaker channels 153
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide
To Next Page
Loading...