4. Tap DISPLAY LANGUAGE to set the language of the user interface on the turret. The drop-down list
of languages is displayed. Tap to select a language. IQ/MAX TOUCH supports the following
international languages: English, French, German, Simplified Chinese, Danish, Dutch, Italian,
Japanese, Korean, Portuguese, and Spanish.
The user interface on the turret is updated to the language selected. Some areas of the user interface
are not translated; for example, logon screen, logon status message, Admin settings, and data
retrieved from the database.
5. Select the font size, Small/Medium/Large, by tapping the appropriate option available under FONT
MAGNIFICATION.
On selecting a particular font size, the text scales up or down by approximately 4 pixel sizes from the
original font size. Medium is the default font size. When Large is selected, text might be displayed as
Medium in some cases to ensure text elements do not overlap.
6. Set the brightness of the device screen by dragging the slider to the left or right of the BRIGHTNESS
field. The brightness slider has a minimum limit of 1 and a maximum limit of 100. You can
immediately see the brightness changes as you move the slider.
A device with an Expansion Module has two brightness sliders. The first one controls the brightness
of the Primary Module, and the second one controls the brightness of the Expansion Module. When
the screen is first accessed, the two sliders are linked and the slider for the Expansion Module is
disabled, so that dragging the slider for the Primary Module changes the brightness of both the
modules at the same time. However, you can temporarily break the link between these two sliders by
tapping on the icon that links them together, allowing the brightness of the Primary and Expansion
Module to be adjusted separately. When you close the Settings application and reopen it, the two
sliders are linked again.
7. Set the SLEEP TIMERS by dragging the slider to the left or right. The sleep timer has a minimum
limit of 5 minutes and a maximum limit of 30 minutes.
Setting the sleep timer defines the period of inactivity before the IQ/MAX TOUCH screen saver
activates. The device screen saver helps to preserve screen life and reduce power consumption.
8. Set the DEFAULT RECEIVE VOLUMES by dragging the slider to the left or right for Handset and
Hands-Free. The volume slider has a minimum limit of 1 and the maximum limit of 40 for Handset
and Hands-Free.
9. Set the RINGER VOLUME by dragging the slider to the left or right. The volume slider has a
minimum limit of 0 and maximum limit of 5.
11.7 System Info
You can view the system details of an IQ/MAX TOUCH device from the System Info section. These
include the current device network, zone, NTP, VoIP, software version and deployment information. All
the fields are read-only.
To access the System Info screen:
1. Tap the User Badge in the footer (located on the right side of the lower panel) of the main screen.
The list of options is displayed.
2. Tap Settings.
The device displays the SETTINGS screen.
3. Tap the System Info option from the left panel to access the screen.
11.7: System Info 171
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide
To Next Page
Loading...
