IPC IQ/MAX TOUCH - Moving or Swapping Fixed Buttons; Removing Fixed Buttons

6.2 Move or swap a fixed button
Rearrange or swap a fixed button assignment in Activity Monitor.
1. Tap Activity Monitor in the Navbar to open the Activity Monitor application.
2. Tap the Edit icon (pencil icon). See Activity Monitor on page 79.
The application displays the fixed buttons in edit mode.
3. To move a button, drag the button and drop it on an empty location in the fixed area.
The button is moved. Its original location is empty.
4. To swap a button, drag the button and drop it on an assigned location in the fixed area.
The two buttons are swapped.
6.3 Remove a fixed button
Remove a fixed button assignment in Activity Monitor.
To remove a floating button assignment, use the Batch settings mode in Favorites. See Configure buttons
in Batch settings mode on page 58.
1. Tap Activity Monitor in the Navbar to open the Activity Monitor application.
2. Use one of the following methods:
•
Long press on a button
•
Edit mode
3. Long press method:
a) Long press on the fixed button to be removed.
b) Tap Remove on the contextual menu. You are asked to confirm the removal.
c) Tap Remove on the confirmation dialog. The fixed button is removed.
4. Edit mode method:
a) Tap the Edit icon. See Activity Monitor on page 79. The application displays the fixed buttons in
edit mode.
b) Tap the Remove icon (x) of the fixed button to be removed. You are asked to confirm the removal.
c) Tap Remove on the confirmation dialog. The fixed button is removed.
6.2: Move or swap a fixed button 81
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide