17
Safety
1
2
3
4
5
6
7
8
4.The hook of the upper strap passes from
the outside to the inside of the second
row seats through the hole of the upper
strap xing point guiding the webbing
behind the backrest. The hook of the
upper strap can be hung on the ISOFIX
xing point behind the middle seat
backrest.
5. Tighten the top tether, and gently
shake the child seat to make sure it
has been properly secured. Adjust the
front passenger seat so that it does not
interfere with the child seat.
1. Move the front seats to the frontmost
position.
2. Adjust or remove the headrest from the
seat where the child seat is to be installed.
3. Pull out the shoulder belt, run the belt
along the correct route on the child seat
and insert the latch into the buckle until a
"click" sound is heard.
Installation of child seat with seat
belt
Notice
● For a rear-facing child seat, adjust
the headrest to the lowest position or
remove it.
● For a front-facing child seat, remove
the headrest if it aects the tting
between the child seat backrest and the
rear seat backrest.
● If a booster cushion is used, it is
forbidden to remove the headrest,
and the top of the headrest shall be
adjusted to a position that is ush with
or closest to the top of the child's head.
● For details of operation of seat, refer to
Chapter II.
To Next Page
Loading...
