EasyManua.ls Logo

JAC T9 - Page 54

JAC T9
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Instruments and control
9. Electronic stability controller
(ESC) indicator (yellow)
10. Electronic stability controller o
(ESC OFF) indicator (yellow)
11. Engine anti-theft indicator
(yellow)
When the ignition switch
is in the "ON" position, the
system rst performs a self-
check. The ESC indicator
lights up for a few seconds and then goes
out, indicating that the system is in normal
working condition.
ESC monitors the driving status, and
under normal driving conditions, the ESC
indicator remains o. If the ESC indicator
ashes during driving, it indicates that the
road surface is slippery and the vehicle is
approaching its traction limit.
When the ignition switch
is in the "ON" position,
press the switch button.
The indicator will light up,
indicating that ESC is in a disabled state.
When the ignition switch
is in the "ON" position, the
system rst performs a self-
check. The engine anti-theft
indicator lights up for a few seconds and
then goes out, indicating that the system is
in normal working condition.
If the anti-theft system certication fails
and the indicator continues to ash, the
vehicle cannot be started at this time.
Contact an after-sales service store for
maintenance. If anti-theft certication
succeeds, the indicator will go out.
12. AUTO HOLD working indicator
(green)
13. Cruise indicator (white/green)
14. High-speed 4WD indicator
(green)
15. Low-speed 4WD indicator
(green)
When the ignition switch
is in the "ON" position, the
indicator will light up and
ash at 1Hz when AUTO
HOLD works.
When the ignition switch
is in the "ON" position and
the cruise control switch
on the steering wheel is
pressed, the white indicator will light
up, indicating that the cruise function is
activated and the vehicle is in the pre-
cruise state.
When the cruise conditions are met,
press the cruise setting button, the green
indicator will light up, and the vehicle will
enter the cruise state.
When the vehicle is in high
speed 4WD mode, this
indicator will light on.
When the vehicle is in low
speed 4WD mode, this
indicator will light on.
4H
4L

Table of Contents

Related product manuals