6. Verify the chassis components received against the packing list included with the
switch. An inventory of parts provided with the switch is provided in “Parts Inventory
(Packing List) for an EX2200 Switch” on page 87.
7. Save the shipping carton and packing materials in case you need to move or ship the
switch later.
Related
Documentation
Mounting an EX2200 Switch on page 88•
• Installing and Connecting an EX2200 Switch on page 85
• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 139
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 142
Parts Inventory (Packing List) for an EX2200 Switch
The EX2200 switches are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping carton against the items on the packing list. The parts shipped depend on the
configuration you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1–800–638–8296. For international-dial or direct-dial options in countries without
toll-free numbers, see http://www.juniper.net/support/requesting-support.html .
Table 28 on page 87 lists the parts and their quantities in the packing list.
Table 28: Parts List for EX2200 Switches
QuantityComponent
1Switch with built-in power supply
1AC power cord appropriate for your geographical location (only for AC switch models)
1Power cord retainer clip (only for AC switch models)
2Mounting brackets:
•
EX2200 switch—provided
•
EX2200-C switch—separately orderable
8Mounting screws to attach the mounting brackets to the switch chassis:
•
EX2200 switch—provided
•
EX2200-C switch—separately orderable
4Rubber feet
87Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Installing the Switch
To Next Page
Loading...
