Juniper EX2200 - Action to Take After an Electrical Accident

Avvertenza Il dispositivo è stato progettato per l'uso con sistemi di
alimentazione TN.
Advarsel Utstyret er utfomet til bruk med TN-strømsystemer.
Aviso O dispositivo foi criado para operar com sistemas de corrente TN.
¡Atención! El equipo está diseñado para trabajar con sistemas de
alimentación tipo TN.
Varning! Enheten är konstruerad för användning tillsammans med
elkraftssystem av TN-typ.
Related
Documentation
General Safety Guidelines and Warnings on page 169•
• General Electrical Safety Guidelines and Warnings on page 197
• Grounded Equipment Warning on page 189
• Multiple Power Supplies Disconnection Warning
Action to Take After an Electrical Accident
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic also applies to hardware devices in the QFX Series and to OCX1100 switches.
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the device.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
Related
Documentation
• General Safety Guidelines and Warnings on page 169
• General Electrical Safety Guidelines and Warnings on page 197
• AC Power Electrical Safety Guidelines on page 200
• DC Power Electrical Safety Guidelines on page 203
Copyright © 2015, Juniper Networks, Inc.212
Complete Hardware Guide for EX2200 Ethernet Switches