EasyManuals Logo

Juniper EX2200 User Manual

Juniper EX2200
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
AC Power Supplies in an EX6200 Switch
DC Power Supply in an EX6200 Switch
AC Power Supply in an EX8200 Switch
DC Power Supply in an EX8200 Switch
AC Power Supply in an EX9204 Switch
DC Power Supply in an EX9204 Switch
AC Power Supply in an EX9208 Switch
DC Power Supply in an EX9208 Switch
AC Power Supply in an EX9214 Switch
DC Power Supply in an EX9214 Switch
Power Supply in an EX Series Redundant Power System
AC Power Supply in OCX1100 Switches
DC Power Supply in OCX1100 Switches
AC Power Supply in a QFX3100 Director Device
AC Power Supply in a QFX3008-I Interconnect Device
Wiring Tray in a QFX3008-I Interconnect Device
AC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device
DC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device
AC Power Supply for a QFX5100 Device
DC Power Supply in a QFX5100 Device
Environmental Requirements and Specifications for EX Series Switches
The switch must be installed in a rack or cabinet housed in a dry, clean, well-ventilated,
and temperature-controlled environment.
Ensure that these environmental guidelines are followed:
The site must be as dust-free as possible, because dust can clog air intake vents and
filters, reducing the efficiency of the switch cooling system.
Maintain ambient airflow for normal switch operation. If the airflow is blocked or
restricted, or if the intake air is too warm, the switch might overheat, leading to the
switch temperature monitor shutting down the switch to protect the hardware
components.
Table 22 on page 66 provides the required environmental conditions for normal switch
operation.
65Copyright © 2015, Juniper Networks, Inc.
Chapter 4: Site Preparation

Table of Contents

Other manuals for Juniper EX2200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX2200 and is the answer not in the manual?

Juniper EX2200 Specifications

General IconGeneral
Throughput77 Mpps
MAC address table8000 entries
Jumbo frames supportYes
Number of VLANs1024
Networking standards-
Switch typeManaged
SFP module slots quantity4
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports quantity48
StackableNo
Product colorBlack
Power consumption (typical)100 W
Operating altitude0 - 3048 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth254 mm
Width441 mm
Height43 mm
Weight3600 g

Related product manuals