Juniper EX2200 User Manual

CHAPTER 14
Returning the Switch or Switch
Components
•
Returning an EX2200 Switch or Component for Repair or Replacement on page 159
•
Locating the Serial Number on an EX2200 Switch or Component on page 160
•
Contacting Customer Support to Obtain Return Materials Authorization for
Switches on page 161
•
Packing an EX2200 Switch or Component for Shipping on page 163
Returning an EX2200 Switch or Component for Repair or Replacement
If you need to return an EX2200 switch or hardware component to Juniper Networks for
repair or replacement, follow this procedure:
1. Determine the serial number of the component. For instructions, see “Locating the
Serial Number on an EX2200 Switch or Component” on page 160.
2. Obtain an RMA number from JTAC as described in “Contacting Customer Support to
Obtain Return Materials Authorization for Switches” on page 161.
NOTE: Do not return any component to Juniper Networks unless you have
first obtained an RMA number. Juniper Networks reserves the right to
refuse shipments that do not have an RMA. Refused shipments are
returned to the customer through collect freight.
3. Pack the switch or component for shipping as described in “Packing an EX2200 Switch
or Component for Shipping” on page 163.
For more information about return and repair policies, see the customer support page at
http://www.juniper.net/support/guidelines.html .
Related
Documentation
EX2200 Switches Hardware Overview on page 3•
159Copyright © 2015, Juniper Networks, Inc.

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g