Juniper EX2200 - Table 17: Optical Interface Support and Copper Interface Support for Gigabit Ethernet SFP Transceivers in EX2200 Switches Except EX2200-C

The tables in this topic describe the optical interface support over single-mode fiber-optic
(SMF) and multimode fiber-optic (MMF) cables and over the copper interface for SFP
transceivers:
•
Table 17 on page 27—Optical interface support and copper interface support for Gigabit
Ethernet SFP transceivers in EX2200 switches except EX2200-C switches.
•
Table 18 on page 46—Optical interface support for Fast Ethernet SFP transceivers
except EX2200-C switches.
•
Table 19 on page 52—Optical interface support and copper interface support for SFP
transceivers in EX2200-C switches.
Table 17: Optical interface Support and Copper Interface Support for Gigabit Ethernet SFP
Transceivers in EX2200 Switches Except EX2200-C Switches
ValueSpecificationEthernet Standard
EX-SFP-1GE-TModel number1000BASE-T
10/100/1000 MbpsRate
RJ-45Connector type
–Transmitter wavelength
–Minimum launch power
–Maximum launch power
–Minimum receiver sensitivity
–Maximum input power
–Core/Cladding size
–Modal bandwidth
100 m (328 ft)Distance
Junos OS for EX Series switches, Release 10.1 or laterSoftware required
Yes, starting with Junos OS Release 12.3R3Support for Virtual Chassis
configuration
27Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Component Specifications